High Performance Masking Tape enquiry
A finely creped, flexible paper masking tape, especially suitable for water or solvent based paints followed by oven drying. Oven drying up to a temperature of 140 degrees C. Applications; final bandages of circuit boards, as well as anti-splintering protection of glass on the rear of mirrors, Paints and even critical filler systems adhere very well to the backing avoiding any kind of flaking, can be removed from rubber, glass and paint - even in cold conditions - without tearing or adhesive residues.
Material: Paper
Medium Tack Protection Tape enquiry
A conformable building grade PVC tape with a good tear and unwind characteristics for both hand and machine application. The special adhesive coating has low adhesion behaviour and strips cleanly and easily after application. This tape should be removed within two weeks of application. Applications; temporary indoor/outdoor protection of metal or hard wood surfaces during construction and painting/spraying work and polished metal surfaces during manufacturing processes.
Material: Pvc / Vinyl
PVC Extra Heavy Duty Pipewrap Tape enquiry
A heavy duty PVC film coated with a clear anti-corrosive aggressive adhesive. Applications; A corrosion and abrasion protection for underground or above ground pipework for use as a rock shield. Prolongs pipework lifespan and helps eliminated frequent maintenance, ie painting, galvanizings, etc. Kicking strip for domestic appliances. Reinforcing eyelet reinforcement for tarpaulins.
Material: Pvc / Vinyl
PVC Heavy Duty Pipewrap Tape enquiry
Heavy duty PVC film coated with an anti-corrosive aggressive adhesive. Applications; corrosion and abrasion protection for underground or above ground pipework, use as an inner wrap or rock shield. Prolongs pipework lifespan and helps eliminate frequent maintenance, ie painting, galvanizing, etc. Kicking strip for washing machines, freezers, fitted units. Eyelet patches for tarpaulins.
Material: Pvc / Vinyl
PVC Low Tack Protection Tape enquiry
A thin PVC film, coated with a low tack UV resistant adhesive. Applications; Temporary protection of anodized or acrylic coated metal window frames, protection of machine parts, printed circuit boards, chromed and plated surfaces. Stainless steel finishes on automobiles, domestic appliances.
Material: Pvc / Vinyl
PVC Self Bonding Electrical Tape enquiry
A shiny self bonding PVC, reliant on friction and overlap to maintain bond until self-bonding cycle completed. Bonding cycle 2 hours at 120 degrees C. Applications; Repair and protection PVC and textile sheathed cables. Once bonding cycle complete provides waterproof non-deteriorating, dust and dirt proof sheath. Transformer, loom harnessing and insulation work.
Material: Pvc / Vinyl
Special Masking Tape for Sandblasting Applications enquiry
A special masking tape with a tough, resistant stabilised paper backing and strong adhesive. Due to the resistant paper backing 4432 is suitable as a stencil material for sandblasting glass and stone; normal durability (6 sec./4 bar). 4432 is also used as a protection tape against splinters of glass and vehicle mirrors. Because of it's properties - a thin, smooth and flexible backing combined with a strong adhesion 4432 gives protection to anti-glare mirrors during rough polishing and at the same time protecting the reverse side of the mirror from damage.
Material: Paper
Surface Protection Tape enquiry
A mechanical and chemical resistant PVC tape coated with a low strength adhesive. 4128 is tear resistant, easy to remove without leaving residues and suitable for machine application. The storage time after application should not exceed one year. 4128 can be applied outdoor for a maximum duration of 3 months.
Material: Pvc / Vinyl
Thermosetting Polycloth Duct Tape enquiry
A polythene coated fabric with a strong heat and cold resisting pressure sensitive adhesive coating. Extremely flexible and will conform to bends and contours. Applications; joint sealing on metal or plastic ducting. Suitable for air duct sealing used throughout the heating and ventilating industry. Joint sealing foil, paper, plastic-faced fibrous insulation materials. Suitable for joining smooth polystyrene insulation materials, polythene sheeting, joints and reinforcing eyelets. Protection against abrasion in inflatable polythene buildings.
Material: Cloth
Translucent Blue PVC Low Tack Protection Tape enquiry
A thin UV stabilised translucent blue PVC film coated with a low tack UV resistant adhesive. Applications; Temporary protection of stainless steel, anodised aluminium and bright material in an outdoor environment. This product is of particular interest to the automotive, name-plates, aircraft and white goods industries and also the construction industry.
Material: Pvc / Vinyl
Transparent Protective Film enquiry
The TESA 4848 surface protection film consists of a polyethylene backing which is coated with a self adhesive UV and age resistant acrylic adhesive mass. It is easy to remove leaving no residue up to 4 weeks. This product is for indoor and outdoor applications.
Material: Polyethylene
We're here to help. Enter your requirements below and we'll get right back to you.